Friday, May 16, 2014

A Guide To Having Well Maintained Inground Fiberglass Pools

By Minnie Whitley


When summer time is near, some of us like to be relaxed while we would feel the sunny heat. Some of us would enjoy some thirst quenching drinks that were prepared. Some of us would no longer wait for so long to have that swimming pool in our home ready.

Having one at home means you could relax and swim all you want. One of the preferred type of this is the inground fiberglass pools. Most people usually choose this type because it needs low maintenance from time to time. Here are some tips on how you could maintain one.

The first procedure would be to always remember not to drain your pool. It has been designed to be full of water even when cleaning. One reason for it is that the pressure that is on the water is being used to keep that balanced to the pressure that is on the ground. If you will be emptying it then there is no longer balance. It would only cause that to crack.

If you would look for an equipment that is best for it then it is a must have to purchase a telescopic pole. Telescopic poles have different lengths and are made of different materials. People are usually using the kind of pole that is made up of aluminum. A person can easily adjust the length of that pole. One may place some accessories on that to aid in cleaning easier.

Some would attach skim nets and leaf rakes at the end of it. If you wanted to catch debris on its surface then you have to use a skim net. If you wanted to remove debris that are just floating then you have to use the leaf rake. It is advisable that you would be using that everyday. This is one way to avoid a huge amount of dirt on it.

If there would be huge amounts of dirt on that then you must vacuum that out. You have a choice to use the one that is manual or the one that is automatic. If you like the manual then have the head attached to that pole. Before placing it in the water, have the hose attached on it. That will trap all the dirt on the bag. If you like the automatic, that will be effortless but expensive. You would just set that, turn on and it would collect debris with lesser effort for you. The vacuum comes in different shapes and styles you could choose from. One thing to be sure of is it the head is fit for fiberglass pools.

After you finish vacuuming, you must brush it as well. That will help remove the slime that was not removed when vacuumed. Be certain a tile cleaner or brush being used is suitable on these pools.

You can also buy test kits. It will help determine the chemical level and quality of the water. Be sure you check every week.

It is important that those procedures would be followed. If you are going to maintain that, it would be useful for so long. A hot day would always be a swimming day.




About the Author:



No comments:

Post a Comment